NISSAN 
NISSAN
International : http://www.nissan-global.com/
Australian : http://nissan.com.au
Nissan Motors
Nissan Motor Co., Ltd., often called Nissan Motors or simply Nissan, is a Japanese automobile manufacturer which formerly marketed vehicles under the Datsun brand name until 1983. The company's main offices are located in the Ginza area of Chūō-ku, Tokyo but Nissan plans to move their headquarters to Yokohama , Kanagawa by 2010, with construction starting in 2007.
Nissan—full name Nissan Motor Co., Ltd. is Japan 's second largest car company after Toyota and is among the top three Asian rivals of the "big three" in the U.S.
The , of V6 configuration, have featured among World's 10 Best Engines for 12 straight years, since the award's inception. A new generation VQ series engine will premiere on the next generation Infiniti G35, the future Skyline GT-R and the 2007 Nissan 350Z. There will also be a new generation 2.5VQ 4-cylinder engine that will power the next generation Altima and likely will power the upcoming SPEC-V 2007 Sentra (which will make its debut in October of 2006 followed by the new Altima in November).
Much like its brother Renault, the pronunciation of its name is different in different markets. In the U.S. , the brand is said "KNEE-sahn", while in the UK it is pronounced "NIH-ssan". In Japan , it is pronounced "NIH-sun".
History
Beginnings Of Datsun Name from 1914
In 1914, the Kwaishinsha Motorcar Works established three years earlier, in Azabu-Hiroo District in Tokyo, built the first DAT. The new car's name was an acronym of the company's partners' surnames:
Kenjiro Den
Rokuro Aoyama
Meitaro Takeuchi
The works was renamed to Kwaishinsha Motorcar Co. in 1918, and again, in 1925, to DAT Motorcar Co
Nissan Model 70 Phaeton, 1938
DAT Motors built trucks in addition to the DAT and Datson passenger cars. In fact, the vast majority of their output was trucks, as there was almost no consumer market for cars at the time. Beginning in 1918, the first DAT trucks were produced for the military market. It was the low demand of the military market in the 1920s that forced DAT to merge in 1926 with Japan 's 2nd most successful truck maker, Jitsuyo Motors.
It was in 1931 when DAT came out with a new smaller car, the first "Datson", meaning "Son of DAT". Later, in 1933 after Nissan took control of DAT Motors, the last syllable of Datson was changed to "sun", because "son" also means "loss" (損) in Japanese, hence the name "Datsun" But before that, in 1926 the Tokyo-based DAT Motors merged with the Osaka-based Jitsuyo Jidosha Co., Ltd. To become DAT Automobile Manufacturing Co., Ltd. in Osaka until 1932.
In 1933, the company name was Nipponized to Jidosha-Seizo Co., Ltd. (自動車製造株式会社, Jidōsha Seizō Kabushiki-Gaisha?, "Automobile Manufacturing Co., Ltd.") and moved to Yokohama .
Nissan name First used in 1928
The name "Nissan" was an abbreviation used on the Tokyo stock market for the holding company Nippon Sangyo (Japan Industries or Nippon Industries), founded by Yoshisuke Aikawa in 1928. This company was the famous Nissan "Zaibatsu" (combine) which included Tobata Casting and Hitachi . At this time Nissan controlled foundries and auto parts businesses, but not until 1933 did Aikawa enter automobile manufacturing. Reference: Cusumano pp 28, 30, 33.
Nissan would eventually grow to including 74 firms, and to be the fourth-largest combine in Japan during World War II. Reference: Cusumano pp 28, 30.
In 1931, Aikawa purchased controlling(?) shares in DAT Motors, then in 1933 merged Tobata Casting's automobile parts department with DAT Motors. As Tobata Casting was a Nissan company, this was the beginning on Nissan's automobile manufacturing. Reference: Cusumano pp 30.
Nissan's Early American Connection
DAT had inherited Kubota's chief designer who was an American, William R. Gorham. This, along with Aikawa's vision-inspiring 1908 visit to Detroit was to greatly affect Nissan's future.
Although it had always been Aikawa's intention to use the latest cutting-edge automaking technology from America , it was Gorham that carried out this plan. All the machinery, vehicle designs and engine designs originally came out of the USA . The machinery was imported into Japan by Mitsubishi on behalf of Nissan, which went into the first Yokohama factory to produce Datsuns. Also consider that of the new Nissan truck model introduced in 1937, the body, chassis and engine was designed by America 's then fourth-largest automaker Graham-Paige for Nissan. That model with some modifications continued to be produced until 1973. Reference: Cusumano pp 34-40.
Nissan Motors founded in 1934
In 1934, Aikawa "separated the expanded automobile parts division of Tobata Casting and incorporated it as a new subsidiary, which he named Nissan Motor (Nissan)". Nissan Motor Co., Ltd. The shareholders of the new company however were not enthusiastic about the prospects of the automobile in Japan , so Aikawa bought out all the Tobata Casting shareholders (using capital from Nippon Industries) in June, 1934. At this time Nissan Motors effectively became owned by Nippon Sangyo and Hitachi . reference: Cusumano, page 37
Nissan built trucks, airplanes, and engines for the Japanese military. Their main plant was moved to China after the land was captured by the military. The plant made machinery for the Japanese war effort until it was captured by American and Russian forces. For two years (1947 to 1948) the company was briefly called Nissan Heavy Industries Corp.
Tie-Ups with Austin Motor Company
Like Hino and Isuzu, but unlike Toyota , Nissan partnered with an established European company to gain access to automobile and engine designs. Nissan chose Austin of the United Kingdom , which later became the British Motor Corporation. Nissan began building Austin 7s in 1930, though the legitimacy of their license at that time is debated.
Later, in 1952 Nissan Motor Company of Japan entered into a well-documented legal agreement with Austin Motor Company of the UK (reference: Cususmano), for Nissan to assemble 2000 imported Austins from partially assembled sets and sell them in Japan under the Austin trademark. The agreement called for Nissan to make all Austin parts locally within three years, a goal Nissan met. Nissan produced and marketed Austins for seven years. The agreement also gave Nissan rights to use Austin patents, which Nissan used in developing its own engines for its Datsun line of cars. In 1953 British-built Austins were assembled and sold, but by 1955, the Austin A50 -- completely built by Nissan and featuring a slightly larger body with new 1489cc engine -- was on the market in Japan . Nissan produced 20,855 Austins from 1953-1959. reference: Cusumano, pp 90-92.
Engine Development: Nissan leveraged the Austin patents to further develop their own modern engine designs past what the Austin 's A- and B-family designs offered. The apex of the Austin-derived engines was the new design A series engine in in 1967. Also in 1967 introduced its new highly advanced four cylinder overhead cam (OHC) Nissan L engine, which while similar to Mercedes-Benz OHC designs was a totally new engine designed by Nissan. This engine powered the new Datsun 510, which gained Nissan respect in the worldwide sedan market. Then, in 1970 Nissan introduced the 240Z sports car which used a six-cylinder variation of the L series engine. The 240z was an immediate sensation and lifted Nissan to world class status in the automobile market.
Merger With Prince Motor Company
In 1966, Nissan merged with the Prince Motor Company, bringing into its range more upmarket cars, including the Skyline and Gloria. The Prince name was eventually abandoned, with successive Skylines and Glorias bearing the Nissan name - however, "Prince" is still used in names of certain Nissan dealers in Japan . Nissan would introduce a new luxury brand for the US market in the early 1990s called Infiniti.
Foreign Expansion
In the wake of the fuel crisis, Nissan became one of the world's largest exporters of automobiles and set up new factories in Mexico and Australia .
Nissan GT-R Concept
The firm established assembly operations in the United States in the early 1980s, with a plant in Smyrna , Tennessee . This facility at first built only trucks and SUVs, such as the 720, Hard body, and Pathfinder, but has since been expanded to produce several car lines. An engine plant in Decherd , Tennessee followed, and most recently a second assembly plant in Canton , Mississippi .
In order to overcome export tariffs and delivery costs to its European customers, Nissan contemplated establishing a plant inside Europe 's borders. After an extensive review, Sunderland in United Kingdom was chosen due to the local availability of a highly skilled workforce and its position near major ports. The plant was completed in 1986 as the subsidiary Nissan Motorr Manufacturing (UK) Ltd. Since then it has arisen to achieve the highly coveted title of being the most productive plant in Europe , and by 2007 will be producing 400,000 vehicles per year.
Financial difficulties (approaching billions) in Australia in the late 1980s caused Nissan to cease production there. Due to the "Button Plan" the Australian operation was unique as the Nissan products were also re-badged both by General Motors Holden (Pulsar re-badged as Holden Astra), and Ford (Bluebird re-badged as Ford Corsair).
Alliance with Renault
In the late 20th Century, with Nissan facing severe financial difficulties, Nissan entered an alliance with Renault S.A. of France .
Signed on March 27, 1999, the Renault-Nissan Alliance is the first of its kind involving a Japanese and a French company, each with its own distinct corporate culture and brand identity.
The Renault-Nissan Alliance is a unique group of two global companies linked by cross-shareholding, with Renault holding 44.3% of Nissan shares, while Nissan holds 15% of Renault shares.
Under president Carlos Ghosn's "Nissan Revival Plan" (NRP), the company has rebounded in what many leading economists consider to be one of the most spectacular corporate turnarounds in history, catapulting Nissan to record profits and a dramatic revitalization of both its Nissan and Infiniti model line-ups. Despite the turnaround, Infiniti sales have been a disappointment. In 2001, the company initiated Nissan 180, capitalizing on the success of the NRP. Ghosn has been recognized in Japan for the company's turnaround in the midst of an ailing Japanese economy. Ghosn and the Nissan turnaround were featured in Japanese manga and popular culture. His achievements in revitalizing Nissan were noted by Emperor Akihito, who awarded him the Japan Medal with Blue Ribbon in 2004.
Products
Nissan has produced an extensive range of mainstream cars and trucks, initially for domestic consumption but exported around the world since the 1950s. There was a major strike in 1953.
It also produced several memorable sports cars, including the Datsun Fairlady 1500, 1600 and 2000 Roadsters, the Z-car, an affordable sports car originally introduced in 1969; and the Skyline GT-R, a powerful all-wheel-drive sports coupe.
In 1985, Nissan created a tuning division, NISMO, for competition and performance development of such cars.
The recently lauched Nissan navara has 175bhp and is fast.
Until 1982, Nissan automobiles in most export markets were sold under the Datsun brand. Since 1989, Nissan has sold its luxury models in North America under the Infiniti brand.
Nissan also sells a small range of keicars, mainly as a joint venture with other Japanese manufacturers like Suzuki or Mitsubishi. Nissan does not develop these cars. Nissan also has shared model development of Japan domestic cars with other manufacturers, particularly Mazda, Subaru, Suzuki and Isuzu.
In China, Nissan produces cars in association with the Dongfeng Motor Group including the 2006 Nissan Livina Geniss. This is the first in the range of a new worldwide family of medium sized cars and is to make its world debut at the Guangzhou International Motor Show.
Australian : http://nissan.com.au
Nissan Motors
Nissan Motor Co., Ltd., often called Nissan Motors or simply Nissan, is a Japanese automobile manufacturer which formerly marketed vehicles under the Datsun brand name until 1983. The company's main offices are located in the Ginza area of Chūō-ku, Tokyo but Nissan plans to move their headquarters to Yokohama , Kanagawa by 2010, with construction starting in 2007.
Nissan—full name Nissan Motor Co., Ltd. is Japan 's second largest car company after Toyota and is among the top three Asian rivals of the "big three" in the U.S.
The , of V6 configuration, have featured among World's 10 Best Engines for 12 straight years, since the award's inception. A new generation VQ series engine will premiere on the next generation Infiniti G35, the future Skyline GT-R and the 2007 Nissan 350Z. There will also be a new generation 2.5VQ 4-cylinder engine that will power the next generation Altima and likely will power the upcoming SPEC-V 2007 Sentra (which will make its debut in October of 2006 followed by the new Altima in November).
Much like its brother Renault, the pronunciation of its name is different in different markets. In the U.S. , the brand is said "KNEE-sahn", while in the UK it is pronounced "NIH-ssan". In Japan , it is pronounced "NIH-sun".
History
Beginnings Of Datsun Name from 1914
In 1914, the Kwaishinsha Motorcar Works established three years earlier, in Azabu-Hiroo District in Tokyo, built the first DAT. The new car's name was an acronym of the company's partners' surnames:
Kenjiro Den
Rokuro Aoyama
Meitaro Takeuchi
The works was renamed to Kwaishinsha Motorcar Co. in 1918, and again, in 1925, to DAT Motorcar Co
Nissan Model 70 Phaeton, 1938
DAT Motors built trucks in addition to the DAT and Datson passenger cars. In fact, the vast majority of their output was trucks, as there was almost no consumer market for cars at the time. Beginning in 1918, the first DAT trucks were produced for the military market. It was the low demand of the military market in the 1920s that forced DAT to merge in 1926 with Japan 's 2nd most successful truck maker, Jitsuyo Motors.
It was in 1931 when DAT came out with a new smaller car, the first "Datson", meaning "Son of DAT". Later, in 1933 after Nissan took control of DAT Motors, the last syllable of Datson was changed to "sun", because "son" also means "loss" (損) in Japanese, hence the name "Datsun" But before that, in 1926 the Tokyo-based DAT Motors merged with the Osaka-based Jitsuyo Jidosha Co., Ltd. To become DAT Automobile Manufacturing Co., Ltd. in Osaka until 1932.
In 1933, the company name was Nipponized to Jidosha-Seizo Co., Ltd. (自動車製造株式会社, Jidōsha Seizō Kabushiki-Gaisha?, "Automobile Manufacturing Co., Ltd.") and moved to Yokohama .
Nissan name First used in 1928
The name "Nissan" was an abbreviation used on the Tokyo stock market for the holding company Nippon Sangyo (Japan Industries or Nippon Industries), founded by Yoshisuke Aikawa in 1928. This company was the famous Nissan "Zaibatsu" (combine) which included Tobata Casting and Hitachi . At this time Nissan controlled foundries and auto parts businesses, but not until 1933 did Aikawa enter automobile manufacturing. Reference: Cusumano pp 28, 30, 33.
Nissan would eventually grow to including 74 firms, and to be the fourth-largest combine in Japan during World War II. Reference: Cusumano pp 28, 30.
In 1931, Aikawa purchased controlling(?) shares in DAT Motors, then in 1933 merged Tobata Casting's automobile parts department with DAT Motors. As Tobata Casting was a Nissan company, this was the beginning on Nissan's automobile manufacturing. Reference: Cusumano pp 30.
Nissan's Early American Connection
DAT had inherited Kubota's chief designer who was an American, William R. Gorham. This, along with Aikawa's vision-inspiring 1908 visit to Detroit was to greatly affect Nissan's future.
Although it had always been Aikawa's intention to use the latest cutting-edge automaking technology from America , it was Gorham that carried out this plan. All the machinery, vehicle designs and engine designs originally came out of the USA . The machinery was imported into Japan by Mitsubishi on behalf of Nissan, which went into the first Yokohama factory to produce Datsuns. Also consider that of the new Nissan truck model introduced in 1937, the body, chassis and engine was designed by America 's then fourth-largest automaker Graham-Paige for Nissan. That model with some modifications continued to be produced until 1973. Reference: Cusumano pp 34-40.
Nissan Motors founded in 1934
In 1934, Aikawa "separated the expanded automobile parts division of Tobata Casting and incorporated it as a new subsidiary, which he named Nissan Motor (Nissan)". Nissan Motor Co., Ltd. The shareholders of the new company however were not enthusiastic about the prospects of the automobile in Japan , so Aikawa bought out all the Tobata Casting shareholders (using capital from Nippon Industries) in June, 1934. At this time Nissan Motors effectively became owned by Nippon Sangyo and Hitachi . reference: Cusumano, page 37
Nissan built trucks, airplanes, and engines for the Japanese military. Their main plant was moved to China after the land was captured by the military. The plant made machinery for the Japanese war effort until it was captured by American and Russian forces. For two years (1947 to 1948) the company was briefly called Nissan Heavy Industries Corp.
Tie-Ups with Austin Motor Company
Like Hino and Isuzu, but unlike Toyota , Nissan partnered with an established European company to gain access to automobile and engine designs. Nissan chose Austin of the United Kingdom , which later became the British Motor Corporation. Nissan began building Austin 7s in 1930, though the legitimacy of their license at that time is debated.
Later, in 1952 Nissan Motor Company of Japan entered into a well-documented legal agreement with Austin Motor Company of the UK (reference: Cususmano), for Nissan to assemble 2000 imported Austins from partially assembled sets and sell them in Japan under the Austin trademark. The agreement called for Nissan to make all Austin parts locally within three years, a goal Nissan met. Nissan produced and marketed Austins for seven years. The agreement also gave Nissan rights to use Austin patents, which Nissan used in developing its own engines for its Datsun line of cars. In 1953 British-built Austins were assembled and sold, but by 1955, the Austin A50 -- completely built by Nissan and featuring a slightly larger body with new 1489cc engine -- was on the market in Japan . Nissan produced 20,855 Austins from 1953-1959. reference: Cusumano, pp 90-92.
Engine Development: Nissan leveraged the Austin patents to further develop their own modern engine designs past what the Austin 's A- and B-family designs offered. The apex of the Austin-derived engines was the new design A series engine in in 1967. Also in 1967 introduced its new highly advanced four cylinder overhead cam (OHC) Nissan L engine, which while similar to Mercedes-Benz OHC designs was a totally new engine designed by Nissan. This engine powered the new Datsun 510, which gained Nissan respect in the worldwide sedan market. Then, in 1970 Nissan introduced the 240Z sports car which used a six-cylinder variation of the L series engine. The 240z was an immediate sensation and lifted Nissan to world class status in the automobile market.
Merger With Prince Motor Company
In 1966, Nissan merged with the Prince Motor Company, bringing into its range more upmarket cars, including the Skyline and Gloria. The Prince name was eventually abandoned, with successive Skylines and Glorias bearing the Nissan name - however, "Prince" is still used in names of certain Nissan dealers in Japan . Nissan would introduce a new luxury brand for the US market in the early 1990s called Infiniti.
Foreign Expansion
In the wake of the fuel crisis, Nissan became one of the world's largest exporters of automobiles and set up new factories in Mexico and Australia .
Nissan GT-R Concept
The firm established assembly operations in the United States in the early 1980s, with a plant in Smyrna , Tennessee . This facility at first built only trucks and SUVs, such as the 720, Hard body, and Pathfinder, but has since been expanded to produce several car lines. An engine plant in Decherd , Tennessee followed, and most recently a second assembly plant in Canton , Mississippi .
In order to overcome export tariffs and delivery costs to its European customers, Nissan contemplated establishing a plant inside Europe 's borders. After an extensive review, Sunderland in United Kingdom was chosen due to the local availability of a highly skilled workforce and its position near major ports. The plant was completed in 1986 as the subsidiary Nissan Motorr Manufacturing (UK) Ltd. Since then it has arisen to achieve the highly coveted title of being the most productive plant in Europe , and by 2007 will be producing 400,000 vehicles per year.
Financial difficulties (approaching billions) in Australia in the late 1980s caused Nissan to cease production there. Due to the "Button Plan" the Australian operation was unique as the Nissan products were also re-badged both by General Motors Holden (Pulsar re-badged as Holden Astra), and Ford (Bluebird re-badged as Ford Corsair).
Alliance with Renault
In the late 20th Century, with Nissan facing severe financial difficulties, Nissan entered an alliance with Renault S.A. of France .
Signed on March 27, 1999, the Renault-Nissan Alliance is the first of its kind involving a Japanese and a French company, each with its own distinct corporate culture and brand identity.
The Renault-Nissan Alliance is a unique group of two global companies linked by cross-shareholding, with Renault holding 44.3% of Nissan shares, while Nissan holds 15% of Renault shares.
Under president Carlos Ghosn's "Nissan Revival Plan" (NRP), the company has rebounded in what many leading economists consider to be one of the most spectacular corporate turnarounds in history, catapulting Nissan to record profits and a dramatic revitalization of both its Nissan and Infiniti model line-ups. Despite the turnaround, Infiniti sales have been a disappointment. In 2001, the company initiated Nissan 180, capitalizing on the success of the NRP. Ghosn has been recognized in Japan for the company's turnaround in the midst of an ailing Japanese economy. Ghosn and the Nissan turnaround were featured in Japanese manga and popular culture. His achievements in revitalizing Nissan were noted by Emperor Akihito, who awarded him the Japan Medal with Blue Ribbon in 2004.
Products
Nissan has produced an extensive range of mainstream cars and trucks, initially for domestic consumption but exported around the world since the 1950s. There was a major strike in 1953.
It also produced several memorable sports cars, including the Datsun Fairlady 1500, 1600 and 2000 Roadsters, the Z-car, an affordable sports car originally introduced in 1969; and the Skyline GT-R, a powerful all-wheel-drive sports coupe.
In 1985, Nissan created a tuning division, NISMO, for competition and performance development of such cars.
The recently lauched Nissan navara has 175bhp and is fast.
Until 1982, Nissan automobiles in most export markets were sold under the Datsun brand. Since 1989, Nissan has sold its luxury models in North America under the Infiniti brand.
Nissan also sells a small range of keicars, mainly as a joint venture with other Japanese manufacturers like Suzuki or Mitsubishi. Nissan does not develop these cars. Nissan also has shared model development of Japan domestic cars with other manufacturers, particularly Mazda, Subaru, Suzuki and Isuzu.
In China, Nissan produces cars in association with the Dongfeng Motor Group including the 2006 Nissan Livina Geniss. This is the first in the range of a new worldwide family of medium sized cars and is to make its world debut at the Guangzhou International Motor Show.
|
|
||||||||
|
|
||||||||
|
|
||||||||
|
|
||||||||
|
|
||||||||
|
|
